Post Construction Chemicals

Product Details:

Features:

• MasterTile 25 is a grey cementitious powder containing performance enhancing polymers and other specialty additives.
• This versatile, easy-to handle,cement-based adhesive is perfect for fixing ceramic tiles, quarry tiles and similar materials.
• It provides strong adhesion to cement/sand screeds,to in-situ/pre-cast and aerated concrete, and brickwork.

Recommended uses:

• New tiling in internal areas & floors in external
• Ceramics Tiles
• Vitrified tiles only for Flooring application
• Showers & wet processing areas
• Laboratories, hospitals, canteens, etc
• Tiling corridors, pavements and roofs

Coverage:

• 25kg bag mixed with 4.5 L of water yields 14 litres of mixed adhesive.
• Each bag of 25 Kg is sufficient for 4.5 ~ 5 m2 of the minimum 3mm application on a flat & smooth surface.

Additional Information:

• Delivery Time: 7-8 days
• Packaging Details: 25 kg bag

Product Details:

We are highly acclaimed in this industry for providing an optimum quality range of BS Wahren CF.

Details:

• "Laminating & Dust Proofing Coating System for Concrete Floor"

Details:

• BS Wahren CF is a transparent, single component, solvent borne, ready to use coating for the concrete floor.
• It comes as a combination of Primer Coat and Top Coat.
• It’s to be used on a fully cured concrete floor with moisture level less than 5%.

Recommended Uses:

• For renewing old concrete floors
• For newly casted concrete floors
• For Outdoor and Indoor use
• Suitable for Garages, Warehouse, Factories & Commercial spaces

Coverage:

Additional Information:

• Delivery Time: 7-8 days
• Packaging Details: 1 kg

Product Details:

With an impressive growth record in this highly competitive industry, we are providing a qualitative range of Waterproofing PU Sealant.

Highlight:

• "One part polyurethane based elastomeric joint sealant"

Details:

• MasterSeal NP 472 is a high performance one component, moisture curing, polyurethane construction sealant.
• In properly designed and constructed joints the product has been formulated to offer a non-slump elastomeric seal, which exhibits good skin formation time and a fast cure.

Recommended Uses:

• MasterSeal NP 472 has been developed specifically for sealing dynamically moving joints such as expansion and control joints
• MasterSeal NP 472 demonstrates high elasticity and recovery properties and therefore may be used to bond and seal most common building materials including concrete, glass, wood, stone, metal and anodized aluminum
• In addition MasterSeal NP 472 has excellent tear resistance and good weathering characteristics

Item Name:

• MasterSeal NP 472

Additional Information:

• Delivery Time: 10 Days
• Packaging Details: 600 ml

Product Details:

"Plasticizing admixture for mortars with waterproofing properties"

Description:

• Putz Dichtament is a unique combination of mortar plasticizer which imparts waterproofing characteristics to the applied surfaces.
• It is a chloride free, highly economical integral waterproofing compound.
• Makes cement saving possible.

Recommended uses:

• Can be admixed in all mortars and plasters requiring waterproofing and damp proofing properties
• Suitable of damp proofing & waterproofing of structures like water tanks, basements, swimming pools
• Suitable for external plasters and in areas where the dampness is always prevailing
• Very effective for application in sewage and water treatment structures, canal linings, underwater structures for irrigation

Additional Information:

• Delivery Time: 7-8 days
• Packaging Details: 30 kg

Product Details:

BS Bondsmart is a high qualiy Block Bonding adhesive with good pot life and fast curing time for faster output of work.
It is compatible with

1. AAC Blocks
2. Flyash Bricks
3. Clay Bricks
4. Cement Board
5. Red Brick

It is crack resistant and non curing system. With practical lft off strength within 25 minutes in an ambient temprature of 30 degrees.It is better performing than similar products in its category and can be compared with high end products like Weber, Laticrete etc.

Additional Information:

• Item Code: Bondsmart

Product Details:

Description:

• A modified solvent free di isocyanate (MDI) resin and a specified catalyst.
• A Polyurethane injection grout used as a waterstop system producing a relatively stiff polyurethane foam. This system only reacts when comes in contact with water to form a non water-soluble foam .
• Used to stop water penetration and to seal the crack or joint.

Recommended uses:

• For filling up cracks, openings and cavities containing water for Civil Engineering structures basements, tunnels, mines, dams, diapgraphm walls and sheetpile walls

 

Additional Information:

• Delivery Time: 10 Days
• Packaging Details: Part A : 5 kg and Part B : 500 gms

Product Details:

Soudaflex Construction FC is a high quality, one component polyurethane sealant with high modulus for a wide range of sealing and bonding applications.

Additional Information:

• Production Capacity: 500
• Delivery Time: 3 to 4 working days
• Packaging Details: 600ml Foil Sausage.

Product Details:

"Ready-to-use quick setting hydraulic cement"

Description:

• Davco K11 Rapid Plug is a series of ultra-fast setting hydraulic mortars which offer immediate and long-term protection against water leakage.
• These mortars harden rapidly and increases slightly in volume while setting.

Recommended uses:

• To plug and stop running water under pressure
• Quick setting cement for waterproofing, fast repairs, urgent installations
• To caulk water leakages
• To fill holes and cracks
• To fix hooks and wall plugs
• To seal pipes and drains
• To anchor railings
• To patch spalled areas

Product Details:

Davco K10 Polyurethane Plus is a flexible single pack water-based polyurethane waterproofing and sealing membrane

Description:

• Davco Polyurethane Plus is a fast drying waterproofing membrane with excellent chemical resistance properties.

Recommended uses:

• Ideal for waterproofing of facades, terraces,balconies and wet areas
• Ideal for waterproofing of concrete roofs including
• Walkways and planter boxes
• For internal and external use

Coverage:

• Approx 1.5 - 1.8 kg/m² @ 1 mm thick in two coats, depending upon site conditions.

Additional Information:

• Item Code: K10PU
• Delivery Time: 7-8 days
• Packaging Details: 25 kg pack