Epoxy Primer

Product Details:

BUILDSMARTBS Smartprime WB EPRNew Generation Hybrid Water Borne Epoxy Priming System for all kinds of coatings including1) Waterbased 1K PU Coating2) Waterbased 2K PU Coating3) Solvent Borne 1K PU Coating4) Solvent Borne 2K PU Coating5) Epoxy Coating Systems6) Epoxy Flooring Systems7) Acrylic Coating Systems8) Acrylic Cementitious Coating System9) Waterproofing Coatings of All types
For all kinds of substrates including, Concrete, Mortar, Plaster, Wood.Not Suitable for Plastics and HDEP, LDPE surfaces.
Mixing Ratio is 1 Part Resin to 2 Parts Hardener to 2 Parts Water (Packaged Water)

Product Details:

Description:
Polpox Prime 9017 R is a modified epoxy resin which in combination with Polpox Prime 9017 H cures into hard mass.

The product is suitable for primer application on various substrates.Features:
Polpox Prime 9017 R / 9017 H system is characterised by-

1. Good mechanical properties
2. Low exotherm & long pot life
3. Excellent adhesion under wet & dry condition
4. Ability to cure in moist condition

Areas of Application:
Polpox Prime 9017 R / 9017 H combination is suggested for,

1. Primer for Epoxy and Polyurethane resin systems.
2. Bonding of old to new concrete.
3. Coating of water tanks, pipes and other metal
4. Concrete structures.
5. Filling of horizontal and vertical joints in concrete.
6. Epoxy mortar binder.

Application Methods:
Surface Preparation-

All surfaces must be sound, clean, dry, free from oil, grease, cement laitance and all loosely adhering particles.
Product application-
Use the product as per the requirement for primer/ bond coat as recommended for specific use. Mix components ofprimer in proportion as recommended. Once mixed, primer should be immediately applied in a thin, continuous film
using stiff brush/ roller or trowel. Porous floors may require two coats of primer. Primer should be allowed to cure
sufficiently, normally 6 - 18 hrs, prior to application of subsequent topping.