Technotrade Associates

BS SmartBond 100 is an essential multipurpose use chemical in the construction industry. No construction project is complete without it. SmartBond 100 is specifically designed for use with cement compositions. It is used in mortar and concretes as a polymer modifier to increase resistance to cracks, water penetration, improving abrasion resistance and durability. It is commonly used with cement mortars as a reliable bonding agent that also has water resistant properties. 

Epoxy 611 R is a modified solvent free epoxy resin which in combination with Epoxy 611 H cures into hard mass. The product is suitable for primer application as well as final coating on various substrates. Its USP is its moisture insensitivity and large range of compatibility in various applications in the construction industry.

Application Methods BS Epoxy 611

Surface Preparation-All surfaces must be sound, clean, dry, and free from oil, grease, cement laitance and all loosely adhering particles.

Product application-Use the product as per the requirement for primer/ bond coat as recommended for specific use. Mix components of primer in proportion as recommended. Once mixed, primer should be immediately applied in a thin, continuous film using a stiff brush/ roller or trowel. Porous floors may require two coats of primer. Primer should be allowed to cure sufficiently, normally 6 - 18 hrs, prior to application of subsequent topping.

High dispersion SBR Latex ensuring higher mixing efficiency with water reduction for site batched mortars & waterproofing/bonding slurry/screed
DESCRIPTION
MasterEmaco SBR 2 is a milky-white, Styrene-Butadiene co-polymer latex liquid, produced from styrene and butadiene by high pressure emulsion polymerization with high dispersive properties. When used with cement, concrete and plaster, it reduces the mixing time through high dispersion of the polymer and improves
waterproofing, new to old concrete/plaster bonding and strength characteristics and reduces shrinkage and cracking of the mix

"Multipurpose repairing & bonding agent needed for construction projects"

Description:

BS Smartbond 100, is an essential product needed for

• Making bonding slurry for cold joints.
• Making vatta or coving & surface repairs to prepare a surface for waterproofing job.
• Used to create plaster mortar for rendering high strength and water resistant properties.
• Used as a bond coat for rehabilitation works.
• To make hard plaster for Squash Courts.
• To make bonding slurry for use as Tile Adhesive & Tile Grout.
• Used in plaster to reduce and slow down whiteness due to hard water.

Recommended uses:

• Cold Joint Bonding Slurry
• For Repairs of Concrete
• Installation and bonding of floor screeds and toppings
• For creating abrasion resistance in concrete floors
• Creation of External rendering plaster with Waterproof, weatherproof and frost resistant properties
• To create long lasting durable crack resistant plasters in Waterproofing and Tanking, Basements, lift pits and water body areas, effluent tanks and swimming pools
• Bonding application may also be done for Installation of tiles, making tile grout and fixing of stones
• Creating Hard Plaster for Squash Courts to withstand regular impact of squash ball
• Creating Cove or “Golas” that do not de-bond later on
• Low End Waterproofing Coating applications

"Solvent free, high performance, long potlife, versatile epoxy bonding agent"

Description:

• MasterBrace 1414has long potlife which helps in achieving effective bond between old and new concrete even if application of repair mortars is delayed.
• MasterBrace 1414 can be applied to both dry and damp surfaces and adheres to most substrates after proper preparation.

Recommended uses:

• Structural bonding of new to old concrete
• Steel bonding
• High temperature concrete
• Grouting dowels