Technotrade Associates

Ultra-Low viscous epoxy resin injection Grouting material. 

ArmGrout Inject EP- LV is a two part epoxy resin system
for grouting gaps ranging from 0.2 mm to 10 mm. It is a
two part system consisting of a base and hardener.

Advantages

•  Low viscosity allows to penetration into finest cracks
• Formulated for hot climates
•  Low creep characteristics
• High compressive, tensile and flexural strengths
•  Fast, convenient pumping
• Withstands a wide range of chemicals
• suitable for structure repairs
• Adheres to concrete with no loss of bond

"High strength, flowable cum trowelable epoxy resin grout system"

Description:

• BS Epoxy 710G is a solvent-free low exothermic, filler based grouting system, designed on modified epoxy resin for use as a high precision, heavy duty flowable cum trowelable grout for civil engineering applications.
• It is supplied as a three component system consisting of epoxy resin, combined with inert fillers and the hardener, to produce a high viscosity flowable liquid grout suitable for voids of 50-150mm.

Recommended uses:

• Machinery foundations with dynamic loads and vibration, where repetitive compression / tension makes cementitious grouts ineffective.
• Backing Filler of steel liners of ore crushing machinery in mines and quarries.
• In corrosive environments where chemicals, oils and solvents render cementitious grouts unsuitable.
• Machinery base plates, crane rails, anchor bolts, hold down bolts and heavy equipment where tensile strength greater than cementitious systems are required.