Polymerizing & Repairing Agents

Product Details:

High dispersion SBR Latex ensuring higher mixing efficiency with water reduction for site batched mortars & waterproofing/bonding slurry/screed
DESCRIPTION
MasterEmaco SBR 2 is a milky-white, Styrene-Butadiene co-polymer latex liquid, produced from styrene and butadiene by high pressure emulsion polymerization with high dispersive properties. When used with cement, concrete and plaster, it reduces the mixing time through high dispersion of the polymer and improves
waterproofing, new to old concrete/plaster bonding and strength characteristics and reduces shrinkage and cracking of the mix

Additional Information:

• Delivery Time: 7-8 days
• Packaging Details: 20 litre pack

Product Details:

"Solvent Free Epoxy System"

Description:

• Epoxy 611 R is a modified epoxy resin which in combination with Epoxy 611 H cures into hard mass.
• The product is suitable for primer application on various substrates.

Recommended uses:

BS Epoxy 611 R / 611 H combination is suggested for,

• Primer for Epoxy and Polyurethane resin systems
• Bonding of old to new concrete
• Coating of water tanks, pipes and other metal
• Concrete structures
• Filling of horizontal and vertical joints in concrete
• Epoxy mortar binder

Additional Information:

• Delivery Time: 7-8 days
• Packaging Details: 611 R : 1 kg and 611 H : 500 gm

Product Details:

We are amongst the reputed organizations, highly engaged in offering an optimum quality range of Nafufill BB2 Polymerizing Agents.

Details:

• It is the highest rated polymerizing agent for doing
• Repairs in concrete
• Bonding slurry for Old to new concrete
• Mix for crystallization powders
• Mix for polymer plaster
• Mix for creating protection plasters
• Excellent UV resistance and compatible with all types of cement available in the country.
• Excellent German formulation and quality that is dependable for doing your repair works relatd to concrete.

Other Details:

• Application Advice available on phone
• TDS can be sent on request
• Images are representative only may be different from actual supply

Additional Information:

• Port of Dispatch: Jaipur
• Delivery Time: 10 Days
• Packaging Details: 5Kg Plastic Sturdy Leak Proof Pack

Product Details:

Description:
Recron 3s acts as "secondary reinforcement" in concrete which arrests cracks, increases resistance to impact/abrasion & greatly improves quality of construction in walls, foundations, tanks, roads and pre-cast products like blocks, pipes, tiles, manhole covers, and more.
Reliance Industries Limited brings your Recron 3s.
The new generation fibre used in a variety of significant industrial applications such as paper, asbestos cement products, construction and lead acid battery.

Recommended uses:
PQC/Floorings
Exposed structures
Water retaining structures
Screeds/Mortars

Applications:
Shotcrete
Hardstandings
PQC
Precast

Product Details:

Description:

• BS Wahren CF is a transparent, single component, solvent borne, ready to use coating for the concrete floor.
• It comes as a combination of Primer Coat and Top Coat.
• It’s to be used on a fully cured concrete floor with moisture level less than 5%.

Additional Information:

• Packaging Details: 4.5kg

Product Details:

"Multipurpose repairing & bonding agent needed for construction projects"

Description:

BS Smartbond 100, is an essential product needed for

• Making bonding slurry for cold joints.
• Making vatta or coving & surface repairs to prepare a surface for waterproofing job.
• Used to create plaster mortar for rendering high strength and water resistant properties.
• Used as a bond coat for rehabilitation works.
• To make hard plaster for Squash Courts.
• To make bonding slurry for use as Tile Adhesive & Tile Grout.
• Used in plaster to reduce and slow down whiteness due to hard water.

Recommended uses:

• Cold Joint Bonding Slurry
• For Repairs of Concrete
• Installation and bonding of floor screeds and toppings
• For creating abrasion resistance in concrete floors
• Creation of External rendering plaster with Waterproof, weatherproof and frost resistant properties
• To create long lasting durable crack resistant plasters in Waterproofing and Tanking, Basements, lift pits and water body areas, effluent tanks and swimming pools
• Bonding application may also be done for Installation of tiles, making tile grout and fixing of stones
• Creating Hard Plaster for Squash Courts to withstand regular impact of squash ball
• Creating Cove or “Golas” that do not de-bond later on
• Low End Waterproofing Coating applications

Additional Information:

• Delivery Time: 7-8 days
• Packaging Details: 20 kg

Product Details:

"High strength, flowable cum trowelable epoxy resin grout system"

Description:

• BS Epoxy 710G is a solvent-free low exothermic, filler based grouting system, designed on modified epoxy resin for use as a high precision, heavy duty flowable cum trowelable grout for civil engineering applications.
• It is supplied as a three component system consisting of epoxy resin, combined with inert fillers and the hardener, to produce a high viscosity flowable liquid grout suitable for voids of 50-150mm.

Recommended uses:

• Machinery foundations with dynamic loads and vibration, where repetitive compression / tension makes cementitious grouts ineffective.
• Backing Filler of steel liners of ore crushing machinery in mines and quarries.
• In corrosive environments where chemicals, oils and solvents render cementitious grouts unsuitable.
• Machinery base plates, crane rails, anchor bolts, hold down bolts and heavy equipment where tensile strength greater than cementitious systems are required.

Additional Information:

• Delivery Time: 8-10 days
• Packaging Details: 1kg + 500gm + 8.5Kg (Kit Size)