Technotrade Associates

We are engaged in offering a wide range of Red Color Floor Hardener to our clients. Our range of all products is widely appreciated by our clients.

"NON-METALLIC MINERAL DRY SHAKE FLOOR HARDENER"
Sika® Chapdur (IN) is a one part, preblended, coloured mineral dry shake hardener for concrete comprising of cement, specially selected natural mineral aggregates, admixtures and pigments. Sika® Chapdur (IN) provides a extremely hard wearing and abrasion resistant topping for monolithic floors. When sprinkled and trowelled into fresh wet concrete floors, it forms a coloured, dense and wear resistant smooth surface.

Description:

• BS Wahren CF is a transparent, single component, solvent borne, ready to use coating for the concrete floor.
• It comes as a combination of Primer Coat and Top Coat.
• It’s to be used on a fully cured concrete floor with moisture level less than 5%.

Mastertop 100 Is a Pre-Mixed, Dry-Shake Surface Hardener

"Colored and natural mineral-aggregate dry-shake, non-metallic , surface hardener"

Description:

• MasterTop 100 is a ready-to-use cementitious dry-shake surface hardener incorporating specially sized and graded mineral aggregates.
• When evenly distributed and finished over freshly leveled and floated concrete, it adds color and improves the wear resistance of concrete floors.

Recommended for use:

• Where an attractive, surface-colored concrete floor is desired
• Where improved wear resistance for light- to moderate-duty traffic is needed
• When traffic and wear do not demand the added abrasion and impact resistance of a metallic-aggregate surface hardener
• Over freshly leveled and floated concrete
• On warehouse and storage areas
• On institutional and commercial floors

Description:

• BS Wahren CF is a transparent, single component, solvent borne, ready to use coating for the concrete floor.
• It comes as a combination of Primer Coat and Top Coat.
• It’s to be used on a fully cured concrete floor with moisture level less than 5%.

BS FloorDense is a clear chloride free, inorganic, waterborne, hardening or densifying treatment for the concrete floor. It may be applied to freshly cast concrete floor or to an existing concrete floor. BS FloorDense is based on advanced Nano Particles using Inorganic Chemistry, that penetrate in to the micro capillaries of the concrete substrate sealing them and preventing release of fine dust from the concrete floor.

About BS FloorDense Concrete Densifier.

BS FloorDense concrete densifier is a liquid chemical hardener to be applied on top of the concrete floor after casting. It can be left as it is after application or buffed for mild sheen or even polished for higher sheen level.

If polishing has to be done for the concrete slab, BS FloorDense is to be used after casting is complete and a suitable grinding and polishing process has to be executed to achieved the desired finish

It doesn’t matter if the concrete floor is polished or not, using BS FloorDense densifier is a logical way to improve strength, top hardness and service life of a concrete floor.

• “A high performance dust cutter and liquid hardener for old and new concrete floors. A product of Master Builders (BASF).”

• Increases top surface strength of concrete floor by 15%
• Cuts of dust and provided sheen to the concrete floor
• Improves lighting efficiency
• Can be used for granite polish project of concrete
• Easy & ready to use
• Coverage 1200-1500 sqft. per drum depending upon floor absorption.