Techno Trade Associates

Description:

• DAVCO K11 CWA (Crystalline, Waterproofing Admixture) is a special cementitious mix of active chemicals that readily reacts with moisture in the concrete to form crystalline structures within the pores and capillary tracts of the concrete. 
• DAVCO K11 CWA, an integral waterproofing system that gives a strong and lasting protection from harsh environmental conditions, is ideal for interior and exterior below grade concrete structures.

Recommended uses:

• Foundations
• Sewage Treatment plants
• Tunnels and subway systems
• Underground structures
• Dams
• Pre-cast structures
• Swimming pools and reservoirs

Liquid, cold-applied elastomeric waterproofing membrane system

Description:

MasterSeal HLM 5000 is a one-component, moisture-curing, bitumen-modified polyurethane elastomeric waterproofing membrane for exterior below-grade or between-slab applications.

Recommended uses:

Concrete

Plywood (exterior)

Exterior below grade (on masonry, concrete, and incidental metal)

Above grade (between two-course concrete and within cavity walls)

Parking garages and concrete tanks

Plaza decks and malls

Fountains and pools

Balconies and planters

Below-grade slabs

Walls and culverts

Sea walls, dams and reservoirs

MasterSeal 551 EL Waterproofing Chemical.
"An elastomeric, cementitious, waterproof coating for concrete and masonry"

Description:

MASTERSEAL 551 is an elastomeric flexible, two component polymers modified cementitious system that requires only on site mixing forming ideal waterproof coating on concrete, masonry, and most other construction materials.

Recommended uses:
Masterseal 551 is ideal:

Waterproofing of Roofs, Decks, Balcony, etc.

Water-retaining structures subjected to movements

Basement-waterproofing

To protect concrete from water, carbonation and deicing salts

Coverage:
Each square metre will require minimum of 0.9 Kg of mixed material per layer. The coverage rate for each layer will be strongly influenced by the roughness of the
substrate.

1.8 kg / m² in two coats to achieve 1 mm thickness.

3.6 kg / m² in three coats to achieve 2 mm thickness.

Highlight:

“A classic high performance waterproofing system for residential and commercial use by BASF.”

Details:

Made by BASF, world's most respected chemicals manufacturing company and also the largest.

EL 551 is available as a ready to use kit. DO NOT ADD WATER.

How to use:

13Kg Powder to be mixed with 5 Kg Liquid to form waterproofing slurry.

Add powder to liquid not liquid to powder

Surface must be moist and clean for application with no loose material

For terraces three coats including a fiber mesh

For sunken areas, basements, water bodies two coats are enough

Apply coats perpendicular to each other.

Allow to cure 4 hours between each coat

For terrace, suken areas always apply a protection plaster of 5mm thickness, then apply leveling course or tiles etc.

Coverage 1 Kit covers 55 to 75 sqft. in two coats depending on the smoothness of the surface

Other Details:

Packaging design may change from time to time.

TDS available on request

Telephonic Support for application advice available

A single component 100% acrylic waterproofing system with highly elastomeric properties & long life UV resistant system even compatible with old bitumen treated surfaces
BS MositureZero Advance is a cold applied, one component water borne liquid applied waterproofing membrane based on modified acrylic technology
 
Uses:
Waterproofing of terraces on both new construction and refurbishment projects
Complex roofs with complicated details, pergolas and structures where it is hard to apply other systems.
Economical extension of life for old roofs needing rehabilitation.
As an effective reflective coating to make thermal impact lesser on building roofs.

• "Multipurpose acrylic polymer based waterproofing and repair mortar admixture"

• Emceflex 15 is a multi-purpose acrylic polymer based admixture, which is specially formulated for the construction Industry.
• It is a very versatile material and can be used as surface sealer, dust proofer and as an additive for sand/cement mortars for waterproofing and concrete repairs.
• Emceflex 15 admixed concretes or mortars exhibit higher abrasion resistance and enhanced imperviousness to water.

• Waterproofing of basements, sunken slab of toilets, terraces, roofs, etc.
• Admixtures for repairing concrete, masonry, surfacing and renders in conjunction with cement
• Repair component for repairing spalled concrete, floors, cantilever, domes, sunken slabs for water closets, etc.
• Bonding additive for new to old concrete
• Admixture for cement based exterior coating
• Bonding additive for tile fixing
• Second component of Dichtament DS-Flex flexible waterproofing system

Roofex® 2200WB system is a single component, water-based moisture cured advanced aliphatic polyurethane based liquid applied membrane specially designed for waterproofing of concrete structures subjected to high flexibility. It is an elastic membrane forming material, hence it can provide good crack bridging up to 2mm in concrete

Crack Bridging Water proof coating for concrete surfaces on the basis of modified Polyurethane resin. 

Resistance to Oxidation 

Seamless membrane with an Excellent Water Vapor Barrier Properties

Weathering and ultra violet (UV) resistant and long-term aging stability

Environmentally friendly, Non-Toxic

Cured Membranes are highly flexible even at extreme temperature

Single component, Cold applied, Application by roller or spraying

It confirms to ASTM C-836 & ASTM C-898

"A coating based on acrylic polymer for making cementitious waterproofing slurry coat" 

Description:

• Simple to use, MasterSeal 511 is a milky-white liquid used with cement to make coating slurry.
• It is an acrylic co-polymer based product.
• Add cement to the MasterSeal 511 liquid in ratio of 1:2.
• Apply on a moist surface, if hot climate cure after every coat.
• Needs protection plaster. Should not be left exposed.
• DO NOT ADD WATER.

Recommended uses:

• General Waterproofing: New Terraces, Sunken areas, Basements lift pits, inspection pits, water towers, & swimming pools, basements
• Other typical applications: Bonding slurry coat, polymer modified flooring, render key coat, render modification, & patch repair mortars

Coverage:

• Approximately 25 Sq.Ft for two coats per kg of material
• Approximately 15-18 Sq.ft when reinforcement with fiber

( Product images are for illustrative purposes only and may differ from the actual product ) 

"Liquid membrane forming compound for curing concrete"

Description:

• Emcoril White is membrane forming curing compounds, to be brushed or sprayed on the fresh concrete only once, at very initial stages which is the critical hardening period of concretes or mortars.
• Emcoril curing compounds form a seamless film on the surface of the evaporation of water from the capillaries and prevents quick drying of the concrete avoiding the cracks and enabling the concrete to hydrate efficiently.

Recommended uses:

• Can be used everywhere efficient curing is required.
• Suitable for large area of concrete which are directly exposed to sunlight; heavy winds other environmental influences.
• Suitable for curing of Concrete roads, bridges canal lining, airport run-ways, water ways, harbor, port piers, dams , Pre-cast piles, pipes, roof decks, slabs, retaining walls, girders, beams overhead repair spot, chimneys, cooling towers, other tall structures.

"Plasticizing admixture for mortars with waterproofing properties"

Description:

• Putz Dichtament is a unique combination of mortar plasticizer which imparts waterproofing characteristics to the applied surfaces.
• It is a chloride free, highly economical integral waterproofing compound.
• Makes cement saving possible.

Recommended uses:

• Can be admixed in all mortars and plasters requiring waterproofing and damp proofing properties
• Suitable of damp proofing & waterproofing of structures like water tanks, basements, swimming pools
• Suitable for external plasters and in areas where the dampness is always prevailing
• Very effective for application in sewage and water treatment structures, canal linings, underwater structures for irrigation

Description:

• Emcekrete guarantees a permanent, reliable connection and bond between machine bases and the foundation of structure.
• Emcekrete is free from harmful chlorides and other aggressive constituents. Adjacent steel areas are permanently protected against corrosion.

Recommended uses: 

•  For grouting machine foundation
•  Bridge bearing etc.
•  For encasing steel in concrete

Liquid, cold-applied elastomeric waterproofing membrane system 

Waterproofing exterior, below grade concrete and between concrete slab applications.

Flexotough fiber 5000 is a contemporality acrylic resin based waterproofing membrane, integrally reinforced with fiber that provides a seamless and tough waterproof barrier with excellent crack bridging ability that can accommodate movements due to variations accruing in the substrate when waterproofing system is done and without having to adding reinforcement between two layers

"Flexible membrane forming waterproofing and protection slurry"

Description:

• Zentrifix-elastic is a two component mineral based polymer modified waterproofing and concrete protection system for specialized structures like dams, bridges, culverts, tunnels and all hydraulic structures where the water pressures are high.
• It is fully suitable for normal waterproofing requirement of terraces, parking structures, basements, swimming pools, sanitary areas etc.
• It is most suitable for protection from chloride attacks.

Recommended uses:

• Sealing of strained basement walls
• Waterproofing system for water tanks, high water heads, any over or underwater applications
• Sealing and protection of bridge decks, splash zones, tunnels, cooling towers, balconies etc.
• As a carbonation resistant coating in repair and protection systems
• Excellent coating for areas showing many changes in geometry

"Robust 2-in-1 High Performance, Water Reducing and Water Proofing Concrete / Mortar Admixture"

Description:

• MasterPel 777 is an innovative liquid admixture designed specifically to allow superior workability in concrete / mortar mixes with reduced water and also achieve high resistance to water ingress.
• It is based on a specially formulated polymers and compatible with all types of cement and binders (like fly ash, ground granulated slag, silica fume, metakaolin, etc).

Recommended Uses:

• MasterPel 777 can be used in all types of concrete and mortar that is used in all types of residential, commercial and infrastructural construction
• Additionally, it can be used in concrete applications constantly or intermittently in contact with water such as sea walls, tunnels, basements, structural and pre-cast concrete in exposed superstructures
• MasterPel 777 is used as a dual action admixture combining both the waterproofing cum plasticizing effect for cement concrete, mortars and plasters

Flexdek 2600 is a high performance, liquid-applied waterproofing membrane of styrene acrylic polymer. It consists of a very elastic polymer with the inherent flexibility that allows the membrane to accommodate movements in the substrate.

It works as a seamless membrane that performs and adapt to any construction requirements in varied climatic conditions.

Flexdek 2600 is especially formulated to seal, waterproof and enhances look of exterior surfaces & roofs. It seals cracks and joints in old or new roofs /walls and simultaneously leaving a seamless finish to the roof surface. It has good adhesion with different surfaces.

• BS Rainpel Sealer is a 100% transparent, pore penetrating sealing system that creates an invisible hydrophobic layer.
• It may be used on all kinds of masonry surfaces such as clay brick, cement blocks, marble, granite, limestone, sandstone including wooden surface and on joints in tiling installations.
• BS Rainpel renders the surface resistant to water ingress and creates Lotus leaf or beading effect to let water float on the surface instead of getting absorbed in the surface.

Powder Crystalline waterproofing concrete admixture

AquaArmC-35 is a Powder Crystalline Waterproofing concrete admixture used to produce permanently active waterproof concrete in structures, potable water tanks, basements etc

Choksey ChemicalsFLEXOLIN 300
"ACRYLIC Liquid Waterproofing Membrane"
Description:
Flexolin 300 is a liquid membrane, which is a highly elastic, solvent free, natural rubber like ACRYLIC water proofing system.It is a one component and not a complicated mixture.It is supplied ready to-use for cold application. It forms flexible coating, which can be painted over if a light, reflective surface is preferred.Flexolin 300 contains no solvent and is suitable for both indoor and outdoor sealing.Recommended uses:
 Acts as an adhesive-for bonding, insulation board, and expanded polystyrene and cork tilesSuitable for both indoor and outdoor sealing and waterproof coatingExternal cellar sealingSilos, store rooms or stable Retaining walls, waterproof paint for walls,waterproof paint for Roof superstructures and connections,Waterproof paint for Terraces ,balconiesFoundations, Under ground structuresDamp & wet roomsFlat or sloping roofsBridgesMetal / corrugated sheets with special primer ‘PR 71 primer’.

• Techforce 2k strong is a two component modified acrylic polymer based cementitious waterproof coating system, which on mixing and hardening provides an excellent water resistant barrier.
• It offers excellent resistance to both positive and negative water pressures.

Transparent pentrating waterproofing liquid in ready to use form.  Its cures in cracks and crevices even in hard to reach areas and cures form a waterproofing barrier.