Concrete Repair

Product Details:

MASTER REPAIR KWIK FIX

MASTER REPAIR KWIK FIX is a ready to use single component rapid hardening, high strength, non shrink repair mortar which requires only addition of clean portable water to produce highly consistent repair mortar. The product is based on blend of portland cement, graded aggregates,fillers, polymers & additives. The mortar when mixed with water it hardens rapidly within 1 hour & can be trafficked after 2 hours. The low water powder ratio of the product ensures for better high early strength development and thus provides long term durability

FEATURES/ADVANTAGES

• Fast setting, Shrinkage compensated
• Rapid hardening and can be trafficked after 2 hours
• Good adhesive and pull out strength
• Provides high early & ultimate compressive strength.
• Low permeability provides better durability.
• Contains no chlorides.
• It has a controlled expansion & good non shrink property
• Iron free: No metallic iron is included in the mix that leads to further deterioration due to rust expansion.
• Factory pre-packed one component ready to use to overcome site batch variations.
• Good bonding strength &resistant to high impact and vibrations without shattering.
• Easy mixing & handling
• Product complies ASTM C 928 category R3 specifications for high performance repair material.

APPLICATION AREAS

• Product can be used for repairing of damaged concrete structures like balconies terraces, walls, beams etc.
• Economical patching material for horizontal repairs of concrete.
• For small localized patch repairs
• It can be used for repair of old worn out concrete floors.
• For the repairing of spalling, concrete facades, honeycombing etc.
• Any repairs requiring significant levels of load bearing.

Additional Information:

• Delivery Time: 5-7 days
• Packaging Details: 30kg bag

Product Details:

MasterEmaco S 488 A cementitious shrinkage compensated, polymer fibre reinforced, thixotropic repair mortarHow does MasterEmaco S 488 work?

MasterEmaco S 488 is a cementitious pre-bagged ready-to-use structural repair mortar in powder form. When mixed with the correct amount of water, it produces a thixotropic, high strength repair mortar, reinforced with acrylic polymer fibres. It exhibits excellent bond characteristics to steel reinforcement and to concrete.

MasterEmaco S 488 mortar is shrinkage compensated mortar and contains no metallic aggregate and is chloride free. Once the product has cured it has low permeability and is extremely durable.

MasterEmaco S 488 is formulated for sprayed or trowelled applications; in thicknesses up to 50mm in one layer by hand application. Greater thicknesses can be achieved when spray applied.

What is MasterEmaco S 488 used for?

MasterEmaco S 488 is designed for all types of structural concrete repair which can be applied by trowel or by spray application:

• Repair of structural members subjected to repetitive loading.
• Repairs to reinforced or pre-stressed beams or columns.
• Protection of concrete subject to attack from water containing chlorides and sulphates etc.
• Repairs in industrial areas, especially those containing mineral oils, lubricants.
• Repairs in marine environments.

MasterEmaco S 488may be used in conjunction with MasterEmaco 8100 AP to provide extra protection to reinforcing steel.

MasterEmaco S 488 may be cured using MasterKure 181

What are the benefits of MasterEmaco S 488?

MasterEmaco S 488offers the following advantages:

• Shrinkage compensation - reduces the risk of cracking due to shrinkage and ensures full contact with host concrete and load transfer in structural repair situations.
• No primer required - allows rapid application at reduced cost.
• Can be spray applied - rapid application of large quantities

Additional Information:

• Production Capacity: 16000 Kgs Per Day
• Delivery Time: 5 to 6 Days
• Packaging Details: Pp Sack 25Kgs