Waterproofing Systems

Product Details:

SPLASH is a clear single component, water based free flowing liquid developed specially for waterproofing of very difficult areas, wherein other waterproofing systems cannot be implemented. SPLASH is a ready to use material available in white turbid color, which penetrates in to the pores. It dries to a clear and tough film which gives high quality waterproofing.

KEY PROPERTIES

• Good penetration property
• Excellent fast setting property
• Very good UV resistance
• Good abrasion resistance

APPLICATIONS

• It can be poured on the areas of terraces where in normal case waterproofing is difficult.
• It can be applied on terraces where already china chips are fixed. SPLASH fills the joints on the china chips and forms a hard and tough transparent film.
• It can be applied on the parapet walls by brushing.
• It can be applied on bricks as well as on stone walls.
• It can be applied on building exterior walls, on the painted surface to provide extra gloss and waterproofing of the walls.

STORAGE CONDITIONS
Keep the material in a temp condition of 30± 5°C

PACK SIZE
1 Litre, 5 Litres and 20 Litres

Product Details:

CICOTAPECRETE P151
"An acrylic based Polymer Modified Cementations Flexible Composite coating system"
Description:
TAPECRETE, in conjunction with cement, makes-up for the shortcomings of plain cement, particularly its poor adhesion properties, low impact strength, low flexural strength and thin section fragility.TAPECRETE Polymer enhances qualities of cement slurry/ mortar/concrete making them excellent choices for use in new constructions as well as for renovation work.Recommended uses:
TAPECRETE P151 is used for surface treatment, protecting, waterproofing and repairing concrete and masonary.

Additional Information:

• Packaging Details: 1 Kg, 5 Kg ,20 Kg. & 50 kg Container

Product Details:

"Two-component acrylic polymer based elastic cementitious waterproof coating system for waterproofing of new and existing structures"

Description:

• It comprises of cement based waterproofing materials, modified acrylic polymer and non-toxic substances.
• The powder and liquid components of TECHELASTIC PLUS can be mixed with slow speed drill and paddle to form a smooth homogenous slurry.
• The slurry can be applied by using stiff bristle brush or roller.
• After hardening it provides an excellent water-resistant barrier.
• The cured membrane is flexible.

Product Details:

High strength epoxy bedding and repair mortar

MasterBrace 2200 is a solvent free, high performance, non-slumping epoxy mortar and adhesive. MasterBrace 2200 can be used as a bedding mortar, thixotropic adhesive and non-sag
concrete repair mortar.
RECOMMENDED USES

1. Bedding of bridge beams or steel bridge bearings
2. Repairing surface defects in concrete in horizontal, vertical and overhead applications
3. Fixing of injection ports for MasterInject resins Bonding of dowels, bolts and anchors into concrete
4. Rapid structural repair of concrete
5. Repair of concrete posts in situ

FEATURES AND BENEFITS

1. Adheres to concrete surfaces – Allows rapid repair of concrete
2. Solvent free – Low VOC and non-shrink
3. Pre-proportioned packaging – No job site errors
4. Easy application – No primer necessary
5. High abrasion, impact and chemical resistance – Can be used as contact surface in aggressive environments
6. Cures hard at low temperatures – Wide application range

Additional Information:

• Delivery Time: 7-8 days
• Packaging Details: Part A Contains : 3.43 kg and Part B Contains : 2.57 kg per unit

Product Details:

We are a reputed entity in the industry, actively engaged in offering an optimum quality range of Acrylic Polymer Waterproofing Chemical.

Details:

• It is formulated specially for use in combination with all kinds of cement blends.
• It is to be used in cementitious slurries as a polymerizing agent and modifier to enhance durability of slurry against moisture ingress along with resistance to hair line cracks.
• Better performance as compared to similar products like Tapecrete P151 or others.

Recommended Uses:

• Sunken areas
• Water bodies
• Terraces where roof garden not present

Coverage:

• It depends on the substrate type (smooth or rough) and application skills.
• On Smooth Concrete 1Kg / 2 Coats / 15-20 Sq. Ft
• On Smooth Concrete 1Kg /3 Coats with Fibre layer / 8-12 Sq. Ft

Additional Information:

• Delivery Time: 7-8 days
• Packaging Details: 20 kg pack

Product Details:

MasterPel 760 is a hydrophilic crystalline powder admixture for concrete to achieve high resistance to water ingress. It is based on a blend of Portland cement, processed silica sand and special catalytic agents which converts hydration by-products to solid crystalline formation in the water transporting capillary tracts and hydration pores, thus rendering the concrete relatively impermeable and increasing durability.

RECOMMENDED USES:-

MasterPel 760 should be used in all structural concrete that is constantly or intermittently in contact with water or other aggressive environments such as sea walls, tunnels, basements, structural and pre-cast concrete. MasterPel 760 can also be used as crystalline waterproofing admixture for cement mortars and plasters. To waterproof structures such as: • Water tanks, Reservoirs • Building Basements & foundations • Swimming pools and water parks • Sewage and Water treatment plants • Dams, canals, Tunnels, Harbours • Retaining walls & sea defence walls • Concrete pipe

 

DOSAGE:

As a guide a dosage of 0.8% to 1.0% by weight of cementitious binder is recommended. Dosage up to 2.0% by weight of cementitious binder can be used in special requirements. For addition to ready mix concrete, a dosage of 5kg/m3 is best recommended.

Product Details:

"Robust 2-in-1 High Performance, Water Reducing and Water Proofing Concrete / Mortar Admixture"

Description:

• MasterPel 777 is an innovative liquid admixture designed specifically to allow superior workability in concrete / mortar mixes with reduced water and also achieve high resistance to water ingress.
• It is based on a specially formulated polymers and compatible with all types of cement and binders (like fly ash, ground granulated slag, silica fume, metakaolin, etc).

Recommended Uses:

• MasterPel 777 can be used in all types of concrete and mortar that is used in all types of residential, commercial and infrastructural construction
• Additionally, it can be used in concrete applications constantly or intermittently in contact with water such as sea walls, tunnels, basements, structural and pre-cast concrete in exposed superstructures
• MasterPel 777 is used as a dual action admixture combining both the waterproofing cum plasticizing effect for cement concrete, mortars and plasters

Additional Information:

• Delivery Time: 7-8 days
• Packaging Details: 20 litre

Product Details:

"Elastomeric, Single Component, Water-Based Waterproofing Membrane"

Description:

• FLEXDEK 2600 is a high performance, liquid-applied waterproofing membrane of styrene acrylic polymer. It consists of a very elastic polymer with the inherent flexibility that allows the membrane to accommodate movements in the substrate.
• It works as a seamless membrane that performs and adapt to any construction requirements in varied climatic conditions.
• FLEXDEK 2600 is especially formulated to seal, waterproof and enhances look of exterior surfaces & roofs. It seals cracks and joints in old or new roofs /walls and simultaneously leaving a seamless finish to the roof surface. It has good adhesion with different surfaces.

Additional Information:

• Delivery Time: 7 days

Product Details:

Choksey ChemicalsFLEXOLIN 300
"ACRYLIC Liquid Waterproofing Membrane"
Description:
Flexolin 300 is a liquid membrane, which is a highly elastic, solvent free, natural rubber like ACRYLIC water proofing system.It is a one component and not a complicated mixture.It is supplied ready to-use for cold application. It forms flexible coating, which can be painted over if a light, reflective surface is preferred.Flexolin 300 contains no solvent and is suitable for both indoor and outdoor sealing.Recommended uses:
 Acts as an adhesive-for bonding, insulation board, and expanded polystyrene and cork tilesSuitable for both indoor and outdoor sealing and waterproof coatingExternal cellar sealingSilos, store rooms or stable Retaining walls, waterproof paint for walls,waterproof paint for Roof superstructures and connections,Waterproof paint for Terraces ,balconiesFoundations, Under ground structuresDamp & wet roomsFlat or sloping roofsBridgesMetal / corrugated sheets with special primer ‘PR 71 primer’.

Product Details:

Choksey Chemicals FLEXOTOUGH FIBRE 5000
"FIBER REINFORCED ACRYLIC WATERPROOF MEMBRANE"
Description:
FLEXOTOUGH FIBER 5000 is a contemporality acrylic resin based waterproofing membrane, integrally reinforced with fiber that provides a seamless and tough waterproof barrier with excellent crack bridging ability that can accommodate movements due to variations accruing in the substrate when waterproofing system is done and without having to adding reinforcement between two layers

Product Details:

MasterSeal 551 EL Waterproofing Chemical.
"An elastomeric, cementitious, waterproof coating for concrete and masonry"

Description:

• MASTERSEAL 551 is an elastomeric flexible, two component polymers modified cementitious system that requires only on site mixing forming ideal waterproof coating on concrete, masonry, and most other construction materials.

Recommended uses:

Masterseal 551 is ideal:

• Waterproofing of Roofs, Decks, Balcony, etc.
• Water-retaining structures subjected to movements
• Basement-waterproofing
• To protect concrete from water, carbonation and deicing salts

Coverage:

Each square metre will require minimum of 0.9 Kg of mixed material per layer. The coverage rate for each layer will be strongly influenced by the roughness of the
substrate.

• 1.8 kg / m² in two coats to achieve 1 mm thickness.
• 3.6 kg / m² in three coats to achieve 2 mm thickness.

Highlight:

• “A classic high performance waterproofing system for residential and commercial use by BASF.”

Details:

• Made by BASF, world's most respected chemicals manufacturing company and also the largest.
• EL 551 is available as a ready to use kit. DO NOT ADD WATER.

How to use:

• 13Kg Powder to be mixed with 5 Kg Liquid to form waterproofing slurry.
• Add powder to liquid not liquid to powder
• Surface must be moist and clean for application with no loose material
• For terraces three coats including a fiber mesh
• For sunken areas, basements, water bodies two coats are enough
• Apply coats perpendicular to each other.
• Allow to cure 4 hours between each coat
• For terrace, suken areas always apply a protection plaster of 5mm thickness, then apply leveling course or tiles etc.
• Coverage 1 Kit covers 55 to 75 sqft. in two coats depending on the smoothness of the surface

Other Details:

• Packaging design may change from time to time.
• TDS available on request
• Telephonic Support for application advice available

Additional Information:

• Production Capacity: 200 Per Day
• Delivery Time: 7 to 10 Working Days
• Packaging Details: 13Kg Bag of Powder and 5Kg Bucket of Liquid

Product Details:

"Flexible and elastic single component polyurethane waterproofing membrane"

Description:

• MasterSeal M 635 is a single component, liquid applied polyurethane based, elastomeric coating for roof waterproofing.

Additional Information:

• Packaging Details: MasterSeal M 635 is available in 25 kg and 6 kg

Product Details:

We take pleasure to introduce ourselves as one of the renowned firms for providing the best-in-class range of Acrylic Polymer Mortar Admixture.

Highlight:

• "Multipurpose acrylic polymer based waterproofing and repair mortar admixture"

Details:

• Emceflex 15 is a multi-purpose acrylic polymer based admixture, which is specially formulated for the construction Industry.
• It is a very versatile material and can be used as surface sealer, dust proofer and as an additive for sand/cement mortars for waterproofing and concrete repairs.
• Emceflex 15 admixed concretes or mortars exhibit higher abrasion resistance and enhanced imperviousness to water.

Recommended Uses:

• Waterproofing of basements, sunken slab of toilets, terraces, roofs, etc.
• Admixtures for repairing concrete, masonry, surfacing and renders in conjunction with cement
• Repair component for repairing spalled concrete, floors, cantilever, domes, sunken slabs for water closets, etc.
• Bonding additive for new to old concrete
• Admixture for cement based exterior coating
• Bonding additive for tile fixing
• Second component of Dichtament DS-Flex flexible waterproofing system

Additional Information:

• Delivery Time: 7-8 days
• Packaging Details: 30 kg

Product Details:

Liquid, cold-applied elastomeric waterproofing membrane system

Description:

• MasterSeal HLM 5000 is a one-component, moisture-curing, bitumen-modified polyurethane elastomeric waterproofing membrane for exterior below-grade or between-slab applications.

Recommended uses:

• Concrete
• Plywood (exterior)
• Exterior below grade (on masonry, concrete, and incidental metal)
• Above grade (between two-course concrete and within cavity walls)
• Parking garages and concrete tanks
• Plaza decks and malls
• Fountains and pools
• Balconies and planters
• Below-grade slabs
• Walls and culverts
• Sea walls, dams and reservoirs

Additional Information:

• Delivery Time: 10 Days
• Packaging Details: 21.999 kg

Product Details:

"A coating based on acrylic polymer for making cementitious waterproofing slurry coat" 

Description:

• Simple to use, MasterSeal 511 is a milky-white liquid used with cement to make coating slurry.
• It is an acrylic co-polymer based product.
• Add cement to the MasterSeal 511 liquid in ratio of 1:2.
• Apply on a moist surface, if hot climate cure after every coat.
• Needs protection plaster. Should not be left exposed.
• DO NOT ADD WATER.

Recommended uses:

• General Waterproofing: New Terraces, Sunken areas, Basements lift pits, inspection pits, water towers, & swimming pools, basements
• Other typical applications: Bonding slurry coat, polymer modified flooring, render key coat, render modification, & patch repair mortars

Coverage:

• Approximately 25 Sq.Ft for two coats per kg of material
• Approximately 15-18 Sq.ft when reinforcement with fiber

( Product images are for illustrative purposes only and may differ from the actual product ) 

Product Details:

"Davco K10 Sovacryl is a premixed flexible acrylic waterproofing membrane that can be applied directly from the container"

Description:

• Applied in a thick layer, it forms a waterproof, flexible film which adapts to the surface changes caused by tension or expansion.

Recommended uses:

• Waterproofing metal roofs, external walls of old buildings, gutters and asbestos roofs
• Permissible substrate
• Metal
• Concrete and mortar
• Steel and zinc
• Timber
• Plastic and asbestos sheets
• Bituminous surfacing
• Masonry or brick

Additional Information:

• Delivery Time: 10 Days
• Packaging Details: 25 kg

Product Details:

"Flexible membrane forming waterproofing and protection slurry"

Description:

• Zentrifix-elastic is a two component mineral based polymer modified waterproofing and concrete protection system for specialized structures like dams, bridges, culverts, tunnels and all hydraulic structures where the water pressures are high.
• It is fully suitable for normal waterproofing requirement of terraces, parking structures, basements, swimming pools, sanitary areas etc.
• It is most suitable for protection from chloride attacks.

Recommended uses:

• Sealing of strained basement walls
• Waterproofing system for water tanks, high water heads, any over or underwater applications
• Sealing and protection of bridge decks, splash zones, tunnels, cooling towers, balconies etc.
• As a carbonation resistant coating in repair and protection systems
• Excellent coating for areas showing many changes in geometry

Additional Information:

• Delivery Time: 10 Days
• Packaging Details: 30 kg

Product Details:

A single component 100% acrylic waterproofing system with highly elastomeric properties & long life UV resistant system even compatible with old bitumen treated surfaces

BS MositureZero Advance is a cold applied, one component water borne liquid applied waterproofing membrane based on modified acrylic technology

 

Uses:

• Waterproofing of terraces on both new construction and refurbishment projects
• Complex roofs with complicated details, pergolas and structures where it is hard to apply other systems.
• Economical extension of life for old roofs needing rehabilitation.
• As an effective reflective coating to make thermal impact lesser on building roofs.

Characteristics:

• Resistance to ultra violet rays and aging
• Highly elastomeric system with crack bridging properties up-to 2mm
• Low VOC water born coating, compatible with potable water requirements
• Single component in Ready to Use format
• Apply by brush or roller
• Excellent adhesion on porous and non-porous substrates
• Forms a seamless membrane for reliable waterproofing
• Water vapour permeable
• 15 months shelf life

Additional Information:

• Delivery Time: 7-8 days
• Packaging Details: 20 kg